一种抗干扰能力强的过载实时监控系统

为了实时监控运输车辆在道路行驶中产生振动的情况,研制了一套过载实时监控系统。本文论述了系统的工作原理和设计特点,详细给出了系统的硬件组成和软件流程圈。该系统用于亚洲一号卫星以及两颗“澳星”的密封容器运输车过载的实时监控,结果表明,系统均达到了预期的设计要求,具有工作稳定可靠,抗干扰能力强等特点。     

蒸汽管道金属蠕变电测仪的研制

从理论和实践两方面对金属材料中蠕变损伤进行了讨论.由其变化与金属内部电阻变化的相关性,提出并研制了一种集无损、准确、灵活、价廉于一体的自动测试系统.这一测试仪器的研制将有利于对金属构件的蠕变损伤的定量研究.     

差压式管道内检测机器人驱动力与速度分析

差压式管道内检测机器人是利用管道中流动介质压力差驱动的检测装置，机器人受力情况及周围流场分布对其运动状态有着重要的影响。通过对检测机器人受力分析和数值模拟，讨论了影响给定机器人驱动力的主要因素，得到了以水为流动介质在水平管道情况下，水流速度与机器人稳态速度的近似关系式，为以后进一步研究机器人定位提供帮助。     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

非线性支撑下悬臂输流管道的Hopf分叉特性

研究了外激励作用下非线性支撑悬臂输流管道系统的Hopf分叉特性,建立了外激励作用下非线性支撑悬臂输流管道系统的动力学方程,并采用Galerkin方法离散动力学方程,由增量谐波平衡(IHB)法推导了方程的近似解析解,由Floquet理论判定了解的稳定性,同时给出了系统的Hopf分叉点。利用数值算法和IHB法研究了支撑位置、支撑结构刚度和阻尼对系统Hopf分叉特性的影响规律。研究表明:系统的幅频特性在Hopf分叉前后发生了改变,响应频率由外激励频率变为系统的自激振动频率,且系统Hopf分叉后,幅值显著增大。该研究结果可为悬臂管道的振动控制提供理论基础。     

机动输油管线泄漏监测技术

机动输油管线采用露天方式快速铺设,容易发生泄漏事故。根据负压波原理,利用一种基于可变窗长中值滤波器的泄漏检测算法,在不降低检测灵敏度的前提下,能有效降低泄漏误报率。该算法在保证泄漏定位精度的同时,还能保持较高的实时性,较好地满足机动输油管线泄漏监测的需要。     

A generic model of motor‐carrier fuel optimization

Fuel optimizers are decision models (software products) that are increasingly recognized as effective fuel management tools by U.S. truckload carriers. Using the latest price data of every truck stop, these models calculate the optimal fueling schedule for each route that indicates: (i) which truck stop(s) to use, and (ii) how much fuel to buy at the chosen truck stop(s) to minimize the refueling cost. In the current form, however, these models minimize only the fuel cost, and ignore or underestimate other costs that are affected by the models' decision variables. On the basis of the interviews with carrier managers, truck drivers, and fuel‐optimizer vendors, this article proposes a comprehensive model of motor‐carrier fuel optimization that considers all of the costs that are affected by the model's decision variables. Simulation results imply that the proposed model not only attains lower vehicle operating costs than the commercial fuel optimizers, but also gives solutions that are more desirable from the drivers' viewpoint. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Optimal outbound dispatch policies: Modeling inventory and cargo capacity

In this paper, we present an optimization model for coordinating inventory and transportation decisions at an outbound distribution warehouse that serves a group of customers located in a given market area. For the practical problems which motivated this paper, the warehouse is operated by a third party logistics provider. However, the models developed here may be applicable in a more general context where outbound distribution is managed by another supply chain member, e.g., a manufacturer. We consider the case where the aggregate demand of the market area is constant and known per period (e.g., per day). Under an immediate delivery policy, an outbound shipment is released each time a demand is realized (e.g., on a daily basis). On the other hand, if these shipments are consolidated over time, then larger (hence more economical) outbound freight quantities can be dispatched. In this case, the physical inventory requirements at the third party warehouse (TPW) are determined by the consolidated freight quantities. Thus, stock replenishment and outbound shipment release policies should be coordinated. By optimizing inventory and freight consolidation decisions simultaneously, we compute the parameters of an integrated inventory/outbound transportation policy. These parameters determine: (i) how often to dispatch a truck so that transportation scale economies are realized and timely delivery requirements are met, and (ii) how often, and in what quantities, the stock should be replenished at the TPW. We prove that the optimal shipment release timing policy is nonstationary, and we present algorithms for computing the policy parameters for both the uncapacitated and finite cargo capacity problems. The model presented in this study is considerably different from the existing inventory/transportation models in the literature. The classical inventory literature assumes that demands should be satisfied as they arrive so that outbound shipment costs are sunk costs, or else these costs are covered by the customer. Hence, the classical literature does not model outbound transportation costs. However, if a freight consolidation policy is in place then the outbound transportation costs can no longer be ignored in optimization. Relying on this observation, this paper models outbound transportation costs, freight consolidation decisions, and cargo capacity constraints explicitly. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 531–556, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10030     

管道瞬态激振响应管长的计算

在水击压力波沿管道传播的过程中，遇到内部流场边界时，就会对管道产生激振响应，从而引起管道的振动。针对管道的激振响应，分别从水击波的简化模型和考虑管道和流体相互作用的固液耦合模型，推导了管道瞬态激振响应中的激振部件间隔管长计算公式，分析比较了简化模型和耦合模型的不同，并且提出一些防止共振的方法。     

判定执行的功耗优化

判定执行消除分支指令,有助于提高性能,但执行额外的指令会造成能量浪费。尽早作废无效的判定指令,可以减少能量消耗。针对Itanium2处理器,修改流水线功能划分,提前读取谓词的值,提出谓词相关情况下的流水线停顿方法。模拟结果表明,提前读取谓词并作废无效指令,能减少能量浪费,提高能量效率。